Guides

‘Droid Factory Frenzy’ walkthrough and challenges in Lego Star Wars: The Skywalker Saga

Image: Traveler’s Tales/Warner Bros. Interactive Entertainment via Polygon

to lego star wars: Skywalker SagaOne of the levels in Episode II is “Droid Factory Frenzy‘, a level where you have to switch characters to get out of the Title Factory. The Droid Factory Frenzy guide explains how to complete this level so you don’t get stuck or lost.


LEGO Star Wars: Skywalker Saga Droid Factory Frenzy Walkthrough

Enter the Droid Factory and play as Anakin and Padmé with C-3PO and R2-D2 in different parts of the map. You can switch between the two at any time in this section, and you must switch to solve the puzzle.

After eliminating enemies with Padmé’s gun, switch positions with the robot. Use the C-3PO to destroy nearby glowing structures and transform them into bridges to reach the quest marker.

In front of some broken bricks to be built on the C-3PO bridge

Image: Traveler’s Tales/Warner Bros. Interactive Entertainment via Polygon

When finished, destroy the glowing object (again) and rebuild it into a console for R2-D2. Activate the console and switch back to Anakin. Use the power to move the non-activated battery and bring it into contact with the active battery. Put it back in its original position.

Anakin uses Force to charge the battery.

Image: Traveler’s Tales/Warner Bros. Interactive Entertainment via Polygon

Climb down the newly opened slide and land on a conveyor belt. Follow the quest marker. When you reach the end of the conveyor belt, switch back to the robot. Follow the quest marks and follow the open shaft to the assembly line. Use one of the barrels full of droid parts to cross the gap and move it to the right conveyor.

A C-3PO prepares to jump over a barrel full of drone parts.

Image: Traveler’s Tales/Warner Bros. Interactive Entertainment via Polygon

Defeat enemies there and follow the quest markers to jump back through the rift back into a barrel full of droids. Destroy the glowing orange shards on the wall to open a new realm.

C-3PO breaks down walls and opens up new realms.

Image: Traveler’s Tales/Warner Bros. Interactive Entertainment via Polygon

Destroy the glowing structures again and rebuild them into a console for the C-3PO. Use the console to break the wall. Pulling a powered cart causes R2-D2 to use the newly opened console.

As Anakin and Padmé, climb the wall of the oven that started moving. Use Anakin’s lightsaber to break through the shiny wall on the left. Completely destroy the structure behind the wall and recreate it as a console for Padmé.

Run along the newly opened road and take down enemies along the way. At the end of the trail, take the zipline on the right.

Destroy the structure in front of the large door that landed on the zipline and rebuild with two levers for Padme and Anakin. Jump on the lever while playing as one of them. Someone else will follow.

[Ed. note: During one of our playthroughs, the structures in front of the door didn’t break correctly for us, not allowing us to rebuild it into the required levers to clear the level. We ended up having to restart the level to solve this, but we couldn’t find a fix for this bug other than restarting the level completely.]

Upon seeing the exit, Padme is captured by the attackers. As R2-D2, quickly follow the quest markers, grab the pillars and activate the console.

Padmé falls, but the gang is captured by Jeango Fett, marking the end of the level.


Droid Factory Frenzy Challenges

risk past

Jump to the conveyor belt and then to the hydraulic press just before the second belt. As the press rises, climb the glowing blue stud handle and ride the secret zipline to complete this challenge.

The blue pin on the hydraulic press lights up when the LEGO Stormtrooper climbs up.

Image: Traveler’s Tales/Warner Bros. Interactive Entertainment via Polygon

mind control drone

Use Jedi mind tricks on Geonosian to put them against each other. (You’ll need to use a Jedi character like Anakin to do this.) This is the best place for Padmé after they have their own console and lots of enemies spawned. Enemies suitable for mind control have a blue mist around their heads.

lounging around

Rescue Padmé within 30 seconds to complete this challenge. R2 can quickly dash without having to fight her enemies, so when you get her you can easily do so by quickly switching to her R2-D2.


More information

‘Droid Factory Frenzy’ walkthrough and challenges in Lego Star Wars: The Skywalker Saga

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
In Lego Star Wars: The Skywalker Saga, one of the Episode II levels is “Droid Factory Frenzy,” a level that has you switching between characters to get out of the titular factory. Our Droid Factory Frenzy guide walks through how to complete this level so you don’t end up stuck or lost.
Lego Star Wars: The Skywalker Saga Droid Factory Frenzy walkthrough
Once you get into the droid factory, you’ll be playing as Anakin and Padmé, with C-3PO and R2-D2 on another part of the map. At any part during this segment, you can swap between the two — and you’ll need to do that to solve the puzzles.
After taking out the enemies with Padmé’s gun, you’ll swap places with the robots. Use C-3PO to destroy the nearby glowing structure and rebuild it into a bridge to get to the quest marker.

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
Once you get across, destroy the glowing object (again) and rebuild it into a console for R2-D2. Activate the console and swap back to Anakin. Use The Force to wiggle the un-activated battery out of place and make it touch the activated battery. Place it back in its original location.

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
Head down the newly-opened chute to land on a conveyor belt. Follow the quest marker through. Once you hit the end of the conveyor belt, swap back to the robots. Follow the quest marker down the open chute onto the assembly line. Jump across the gap to the right assembly line by using one of the barrels full of droid parts.

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
Defeat the enemies there and follow the quest marker to hop across the gap again with the droid-filled barrels. Destroy the orange glowing parts on the wall to open up a new area.

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
Again, destroy the glowing structure and rebuild it into a console for C-3PO. Use the console to break the wall. Once the cart has moved in with the energy source, make R2-D2 use the newly-opened console.
As Anakin and Padmé, climb up the furnace wall that started moving. Use Anakin’s lightsaber to cut through the sparking wall on the left. Completely destroy the structure behind the wall and rebuild it into a console for Padmé.
Run down the newly-opened path and take out enemies along the way. At the end of the path, take the zipline on the right.
Destroy the structures in front of the big door (where you landed off the zipline) and rebuild them into two levers for Padmé and Anakin. Jump on the lever while playing as one of them; the other will follow.
[Ed. note: During one of our playthroughs, the structures in front of the door didn’t break correctly for us, not allowing us to rebuild it into the required levers to clear the level. We ended up having to restart the level to solve this, but we couldn’t find a fix for this bug other than restarting the level completely.] As the exit is in sight, Padmé will get scooped up by raiders. As R2-D2, follow the quest markers quickly to grapple on to a post and activate the console.
Padmé will drop, but the gang will get captured by Jango Fett, marking the end of the level.
Droid Factory Frenzy challenges
Zipping Past Danger
After jumping on conveyor belt, jump on to the hydraulic press right before the second belt. As the press rises, climb up the blue glowing stud grips to take a secret zip line to complete this challenge.

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
Mind Control Drone
Use Jedi Mind Tricks on a Geonosian to turn them against each other. (You’ll need to use a Jedi character like Anakin to do this.) The best place to do this is after Padmé uses her respective console and many enemies spawn. Eligible enemies for mind control will have the blue fog around their heads.
No Hanging Around
To complete this challenge, save Padmé within 30 seconds. You can do this easily by quickly switching to R2-D2 when she gets taken, as R2 can run by enemies without having to fight them.

#Droid #Factory #Frenzy #walkthrough #challenges #Lego #Star #Wars #Skywalker #Saga

‘Droid Factory Frenzy’ walkthrough and challenges in Lego Star Wars: The Skywalker Saga

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
In Lego Star Wars: The Skywalker Saga, one of the Episode II levels is “Droid Factory Frenzy,” a level that has you switching between characters to get out of the titular factory. Our Droid Factory Frenzy guide walks through how to complete this level so you don’t end up stuck or lost.
Lego Star Wars: The Skywalker Saga Droid Factory Frenzy walkthrough
Once you get into the droid factory, you’ll be playing as Anakin and Padmé, with C-3PO and R2-D2 on another part of the map. At any part during this segment, you can swap between the two — and you’ll need to do that to solve the puzzles.
After taking out the enemies with Padmé’s gun, you’ll swap places with the robots. Use C-3PO to destroy the nearby glowing structure and rebuild it into a bridge to get to the quest marker.

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
Once you get across, destroy the glowing object (again) and rebuild it into a console for R2-D2. Activate the console and swap back to Anakin. Use The Force to wiggle the un-activated battery out of place and make it touch the activated battery. Place it back in its original location.

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
Head down the newly-opened chute to land on a conveyor belt. Follow the quest marker through. Once you hit the end of the conveyor belt, swap back to the robots. Follow the quest marker down the open chute onto the assembly line. Jump across the gap to the right assembly line by using one of the barrels full of droid parts.

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
Defeat the enemies there and follow the quest marker to hop across the gap again with the droid-filled barrels. Destroy the orange glowing parts on the wall to open up a new area.

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
Again, destroy the glowing structure and rebuild it into a console for C-3PO. Use the console to break the wall. Once the cart has moved in with the energy source, make R2-D2 use the newly-opened console.
As Anakin and Padmé, climb up the furnace wall that started moving. Use Anakin’s lightsaber to cut through the sparking wall on the left. Completely destroy the structure behind the wall and rebuild it into a console for Padmé.
Run down the newly-opened path and take out enemies along the way. At the end of the path, take the zipline on the right.
Destroy the structures in front of the big door (where you landed off the zipline) and rebuild them into two levers for Padmé and Anakin. Jump on the lever while playing as one of them; the other will follow.
[Ed. note: During one of our playthroughs, the structures in front of the door didn’t break correctly for us, not allowing us to rebuild it into the required levers to clear the level. We ended up having to restart the level to solve this, but we couldn’t find a fix for this bug other than restarting the level completely.] As the exit is in sight, Padmé will get scooped up by raiders. As R2-D2, follow the quest markers quickly to grapple on to a post and activate the console.
Padmé will drop, but the gang will get captured by Jango Fett, marking the end of the level.
Droid Factory Frenzy challenges
Zipping Past Danger
After jumping on conveyor belt, jump on to the hydraulic press right before the second belt. As the press rises, climb up the blue glowing stud grips to take a secret zip line to complete this challenge.

Image: Traveller’s Tales/Warner Bros. Interactive Entertainment via Polygon
Mind Control Drone
Use Jedi Mind Tricks on a Geonosian to turn them against each other. (You’ll need to use a Jedi character like Anakin to do this.) The best place to do this is after Padmé uses her respective console and many enemies spawn. Eligible enemies for mind control will have the blue fog around their heads.
No Hanging Around
To complete this challenge, save Padmé within 30 seconds. You can do this easily by quickly switching to R2-D2 when she gets taken, as R2 can run by enemies without having to fight them.

#Droid #Factory #Frenzy #walkthrough #challenges #Lego #Star #Wars #Skywalker #Saga


Synthetic: Vik News

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Back to top button