Game

How to Hook up a Nintendo Switch to a TV

Connect your Nintendo Switch to your TV and play on the big screen

what you need to know

  • Open the back cover of the Nintendo Switch dock and connect both the power adapter and HDMI cable.
  • Connect the other end of the power adapter to a power outlet and connect the HDMI cable to the TV.
  • Disconnect the Joy-Con, place the Nintendo Switch in the dock and turn it on.

This article will guide you through the steps to connect your Nintendo Switch or Nintendo Switch (OLED model) to your TV. Nintendo Switch Lite does not support TV mode.

what you will need

Collect these items to connect your Nintendo Switch to your TV. When you buy a Switch, you should include everything except the TV.

  • Nintendo Switch Gaming Device with Joy-Cons
  • nintendo switch dock
  • power adapter
  • HDMI cable
  • Joy-Coy handle or hand strap (optional)
  • HDMI compatible TV

How to Set Up Pp on Nintendo Switch

Connect Nintendo Switch to TV

With all of the above, it only takes a minute to connect your Switch to your TV.

Place the Nintendo Switch dock on a stable surface near the TV. Open the back cover of the dock.

Connect the power adapter to . power adapter If you haven’t already done so, connect the port and plug it into an electrical outlet.

One end of the HDMI cable HDMI output Connect the connector on the back of the dock and the other end to the HDMI port on the back of your TV.

Close the back cover of the dock while routing the cables through the opening.

Disconnect the Joy-Con controller from the Switch. Press the button on the back of the Joy-Con and slide it up to remove it. The same goes for the second Joy-Con.

Joy-Con Grip Switch Controller

You can use the controller as is, attach a wrist strap, or slide it into the Joy-Con grip. If you bought a Joy-Con charging handle, you can use it as well.

Place your Nintendo Switch in the dock. Make sure the screen is facing the front of the dock displaying the Nintendo Switch logo.

Turn on the switch and the TV. Match the input on your TV to the appropriate HDMI port you are using.

When docked, the switch’s screen turns off, but the TV now shows the switch’s screen. So be prepared to play!

Reverse the steps above to disconnect your Nintendo Switch from your TV after playing. You can then reconnect the dock to a power outlet, reconnect the Joy-Cons, and place the device in the dock to charge your Nintendo Switch and controller.


More information

How to Hook up a Nintendo Switch to a TV

Connect your Nintendo Switch to the TV and play on the big screen

What to Know
Open the back cover of the Nintendo Switch dock and connect both the AC adapter and HDMI cable.
Plug the other ends of the AC adapter into a wall outlet and the HDMI cable into your TV.
Detach the Joy-Cons, place your Nintendo Switch into the dock, and power it on.

This article explains the steps to connect your Nintendo Switch or Nintendo Switch (OLED model) to your television. The Nintendo Switch Lite does not support TV mode.

What You’ll Need

Gather these items to connect your Nintendo Switch to your TV. Everything except for the TV should have been included in the box when you purchased your Switch.

Nintendo Switch game unit with Joy-Cons
Nintendo Switch dock
AC adapter
HDMI cable
Joy-Coy grip or wrist straps (optional)
HDMI-compatible TV
How to Set Pp the Nintendo Switch
Connect Your Nintendo Switch to Your TV

Once you have all the materials above, connecting your Switch to your television takes only a minute.

Place your Nintendo Switch dock on a stable surface close to the television. Open the back cover of the dock.

Connect the AC adapter to the AC Adapter port, if it’s not already, and plug it into a wall outlet.

Plug one end of the HDMI cable into the HDMI Out port on the back of the dock and the other end into the HDMI port on the back of your TV.

Close the back cover of the dock while routing the cables through the opening.

Detach the Joy-Con controllers from the Switch. Press the button on the back of a Joy-Con and slide it upward to remove it. Do the same with the second Joy-Con.

You can use the controllers as-is, connect the wrist straps, or slide them into the Joy-Con grip. If you purchased a Joy-Con Charging Grip, you could use that as well.

Put your Nintendo Switch into the dock. Make sure the screen faces the front of the dock where you see the Nintendo Switch logo.

Power on the Switch and your television. Adjust the input on your TV for the corresponding HDMI port you used.

The screen on the Switch turns off when it’s in the dock, but you should now see the Switch’s screen on your television. So, you should be ready to play!

If you want to disconnect your Nintendo Switch from your television when you finish playing, reverse the steps above. You can then plug the dock back into the wall outlet, reattach the Joy-Cons, and put the unit into the dock to charge the Nintendo Switch and its controllers.

#Hook #Nintendo #Switch

How to Hook up a Nintendo Switch to a TV

Connect your Nintendo Switch to the TV and play on the big screen

What to Know
Open the back cover of the Nintendo Switch dock and connect both the AC adapter and HDMI cable.
Plug the other ends of the AC adapter into a wall outlet and the HDMI cable into your TV.
Detach the Joy-Cons, place your Nintendo Switch into the dock, and power it on.

This article explains the steps to connect your Nintendo Switch or Nintendo Switch (OLED model) to your television. The Nintendo Switch Lite does not support TV mode.

What You’ll Need

Gather these items to connect your Nintendo Switch to your TV. Everything except for the TV should have been included in the box when you purchased your Switch.

Nintendo Switch game unit with Joy-Cons
Nintendo Switch dock
AC adapter
HDMI cable
Joy-Coy grip or wrist straps (optional)
HDMI-compatible TV
How to Set Pp the Nintendo Switch
Connect Your Nintendo Switch to Your TV

Once you have all the materials above, connecting your Switch to your television takes only a minute.

Place your Nintendo Switch dock on a stable surface close to the television. Open the back cover of the dock.

Connect the AC adapter to the AC Adapter port, if it’s not already, and plug it into a wall outlet.

Plug one end of the HDMI cable into the HDMI Out port on the back of the dock and the other end into the HDMI port on the back of your TV.

Close the back cover of the dock while routing the cables through the opening.

Detach the Joy-Con controllers from the Switch. Press the button on the back of a Joy-Con and slide it upward to remove it. Do the same with the second Joy-Con.

You can use the controllers as-is, connect the wrist straps, or slide them into the Joy-Con grip. If you purchased a Joy-Con Charging Grip, you could use that as well.

Put your Nintendo Switch into the dock. Make sure the screen faces the front of the dock where you see the Nintendo Switch logo.

Power on the Switch and your television. Adjust the input on your TV for the corresponding HDMI port you used.

The screen on the Switch turns off when it’s in the dock, but you should now see the Switch’s screen on your television. So, you should be ready to play!

If you want to disconnect your Nintendo Switch from your television when you finish playing, reverse the steps above. You can then plug the dock back into the wall outlet, reattach the Joy-Cons, and put the unit into the dock to charge the Nintendo Switch and its controllers.

#Hook #Nintendo #Switch


Synthetic: Vik News

Đỗ Thủy

I'm Do Thuy, passionate about creativity, blogging every day is what I'm doing. It's really what I love. Follow me for useful knowledge about society, community and learning.

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Back to top button