Tech

How to Install Security Cameras

Correct installation with easy to understand steps

You can increase your sense of security by installing security cameras around your home. However, there are a number of important factors to consider when choosing the right camera and deciding where to place your security camera.

Choosing a surveillance camera

Before mounting your security camera, you need to find the one that best suits your needs. Always choose the right camera with the right features for the right job. Here are some important considerations to keep in mind.

  • If the location where you mount the camera already has motion detection lights, you can save money by purchasing a security camera without night vision goggles.
  • If there is no power or outlet nearby, use a battery or solar powered security camera.
  • Buy a camera with cloud-based storage to avoid losing important videos or photos.
  • Always buy the highest resolution camera you can afford.
  • It is easier to set up a wireless camera with cloud storage if the internet is stable. Otherwise, you will have to buy a more expensive wired camera and a central controller for video recording.

Choosing the right mounting material

The best outdoor security cameras are those with shutters that block out sunlight. Even better if you can afford to buy a dome camera because it makes it difficult for an intruder to see where the camera is pointing. Surveillance cameras have a round bottom plate mechanism that allows for easy camera angle adjustment after installation.

Night vision cameras include an additional camera lens. These are actually LED bulbs that illuminate an area with light of a frequency that is invisible to the human eye. An intruder cannot see this light, but the camera can see the entire area as if it were daytime.

Decide where to mount the security camera

Before you begin the actual mounting of your security camera, you should take some time to consider the most effective mounting location. Here are some things to consider:

Consider each entry point separately. The most important consideration when installing a security camera is its location. Think of each access point to your home as a separate installation project. Step back and investigate the entire spawn point. Imagine where a robber is most likely to come as you approach the entrance to your home.

Use an existing object through a statement. For entrances, install a camera above the door to get a clear image of your face. If you already have lights above your door, this is a great place to hide your security camera and only make it visible as part of your light base.

Image of overhead lighting unit above the front door

Use beams or columns. Beams and rods are usually placed at a high angle to provide both an intruder’s face visible from above and the angle of the approach path an intruder takes to gain access to the door.

image of ceiling joists above front door

Think of a side access point like a window. Thieves do not always use the door. If you have windows on the side of your house, consider installing the security camera on a nearby object, such as a pole or tree, with a clear view of the entry point.

side entry point image

The rear entry point is the most important. Most thieves find it safer to break in through a back door, especially at night. Especially if that door goes underground. As with your front door, consider the columns, beams, and other structures you can mount your camera on. Ideally, aim for a camera angle like the one below that would cover not only the door, but also the driveway an intruder had to access.

rear access point image of house

How to install a surveillance camera

Once you have chosen your camera and determined the most effective location, you can begin the actual installation of your security camera. Installation consists partly of physically installing the hardware and partly configuring the software.

These installation instructions are the general steps you need to take to install your security camera. Most cameras require these steps, but some manufacturers may require additional steps or a different order to perform the steps. Be sure to read the installation instructions and materials provided with the selected security camera.

When you’re ready to start installing your camera, you may need to configure your camera in the connected security app. Make sure the mobile app is installed, the camera is turned on, and the app is communicating properly with the camera. This can be tricky if you already have the app installed as you usually need to scan a QR code on the back of the camera to use the app.

QR code image on camera

Assemble the base. At each entry point, decide where to mount the camera. Start by assembling the base plate. They usually have 2 or 3 screw holes. Most cameras come with self-drilling screws that will work in most wood with a standard electric drill.

Image of a camera base plate attached to a tree

Determines how the camera is attached to the base plate. Most cameras come with mounting hardware that attaches to a base plate for easy connection and disconnection at the push of a button. Before attaching the base to the mounting points, make sure you understand how to attach the unit to the base.

Confirmation image of bracket attachment to base plate

Mount and adjust the camera. Once the base plate is attached to the pole or wall where the camera will be mounted, attach the brackets and camera to the base plate. Then adjust the camera angle and tighten the screw or wing nut to secure the camera position.

Outdoor surveillance camera mounted image

Mount and adjust all peripherals. If you are using a solar camera, you will need to repeat the above process to mount the solar panel in a nearby location. Install all solar panels in a location with easy access to the path of the sun throughout the day.

Image of Solar Panel Mounting on Surveillance Camera

Then connect and route all cables. If you are using a wireless solar powered camera, you only need to worry about the cables from the camera to the solar panel.

Battery-powered cameras do not have cables.

Wired cameras require both a data line into the house (which may require drilling or cables running through existing conduit) and a cable that plugs into a nearby electrical outlet. The outdoor security camera cable is designed for outdoor use, so you can use cable ties to secure the cable to an existing cable on the same pole. If not available, wire clips can be used to secure the wire along the wood studs and walls.

Image of outdoor security camera near cables

Sutin Yuukung / EyeEm\Getty Images

Look at the settings in the security app. Browse all settings in the Security Camera app to take advantage of all available features.

You don’t want to know that audio recording is disabled after an intruder has already broken in. Often the tone of the police can provide important information. Also, make sure your camera resolution is set to the highest setting to get clear images of your face and license plate.

Screenshot of Security Camera app settings.

Use IP camera software. Since each security camera has a unique IP address, you can use a generic IP security camera app that can connect to all installed cameras and display them on one screen. This allows you to view all cameras simultaneously using your tablet, computer or smartphone.


More information

How to Install Security Cameras

Proper installation in easy-to-follow steps

You may want to install security cameras around your home to increase your sense of security. But there are a number of important factors you should keep in mind when choosing the right camera, and deciding on the location for your security camera installation.

Select the Security Cameras

Before you mount your security cameras, you’ll need to find the best security cameras to meet your needs. Always choose the right camera with the right features for the right job. Here are a few important considerations to keep in mind:

If the location you’re mounting a camera already has motion-activated lights, you can save money by buying a security camera without night vision.
If there are no power sources or outlets nearby, use a security camera that’s battery or solar-powered.
To ensure important video or photos don’t get lost, try to purchase cameras with cloud-based storage.
Always purchase the highest resolution camera you can afford.
If your internet is reliable, a wireless camera with cloud storage is easier to install. Otherwise, you’ll need to purchase more expensive wired cameras as well as a central controller for video recording.
Select the Right Mounting Hardware

The best outdoor security cameras are those that come with a hood to shield from sun glare. If you afford a dome camera, these are even better because it’s difficult for intruders to see where the camera is pointed. Security cameras come with a round base plate mechanism that allows for easy adjustment of the camera angle after mounting.

Night vision cameras come with what look like extra camera lenses. These are actually LED bulbs that illuminate an area with light in a frequency that’s invisible to the human eye. Intruders won’t see this light, but your camera will be able to see the entire area as well as if it were daytime.
Determine Where to Mount Your Security Cameras

Before you begin the process of actually mounting your security cameras, you should spend some time considering where the most effective places are to mount them. Here are some things to keep in mind:

Consider each entry point separately. The most important aspect of installing a security camera is location. Consider every entry point to your house as a separate installation project. Step back and examine the entire entry point. Imagine where intruders will most likely be coming from when they approach the entry point to the house.

Take advantage of existing objects above doorways. For doorways, place a camera over the door for clear face captures. If you already have lights above the door, these are an excellent location to conceal a security camera and make it appear only as part of the lighting base.

Use beams or posts. Beams and joists are usually positioned at a high angle that provide both an overhead view of the intruders face, as well as an angle of access routes intruders will take to approach the doorway.

Remember side access points like windows. Intruders don’t always use doorways. If there are windows on the sides of a home, consider installing a security camera on any nearby objects like posts or trees that provide a clear view of those entry points.

Rear entry points are most critical. Most intruders think it’s safer, especially at night, to enter a rear door. Especially if that door goes into the basement. Just like a front door, consider all posts, beams and other structures where you could mount the camera. Ideally aim for a camera angle like the one below which covers not only the doorway but also the access path that an intruder has to approach from.

How to Install Security Cameras

Once you’ve selected your cameras and decided where they will be most effective, you can begin the process of actually installing the security cameras. Installation is part physically installing the hardware and part configuring the software.

These installation instructions are general steps you’ll need to install your security camera. While most cameras will require these steps, some manufacturers may require additional steps or may require a different order for the steps to be completed. Be sure to read the installation instructions and materials that come packaged with your chosen security cameras.

Once you’re ready to start installing your cameras you’ll probably need to configure the cameras in the accompanying security app. Make sure to get the mobile app installed, the camera powered up, and your app communicating with the camera properly. Usually, apps need you to scan a QR code on the back of the camera which can be difficult if you’ve already mounted it.

Mount the base. At each entrance point, decide on the location or locations where you want to mount your camera. Start by mounting the base plate. These usually have two or three screw holes. Most cameras come with self-drilling screws that will work in most types of wood with just a regular electric drill.

Determine how the camera attaches to the base plate. Most cameras come with mounting hardware that attaches to the base plate in a way that’s easy to connect and disconnect by pressing a button. Make sure you understand how the unit attaches to the base plate before you finish attaching the base plate to the mounting point.

Mount and adjust the camera. Once the base plate is attached to the post or wall where you’re mounting the camera, attach the mount and the camera to the base plate. Then adjust the camera angle and tighten the screws or wingnuts that hold the camera position in place.

Mount and adjust any peripherals. If you’re using a solar-powered camera, then you’ll need to repeat the process above to mount the solar panel in a nearby location. Try to mount any solar panels in a location that has clear access to the path of the sun throughout the entire day.

Next, attach and run all cables. If you’re using a wireless solar-powered camera then you’ll only need to worry about the wire from your camera to the solar panel.

Battery-powered cameras won’t have any cables.

Wired cameras will require both the data line into the house (which may require drilling or passing the wire through existing conduit), as well as running wires to a nearby outlet. Outdoor security camera wires are rated for outdoor use, so it’s okay to tie-wrap the cable to any existing wires on the same pole. If there are none, you can use wire staples to attach the wire along wooden posts and along walls.

 Sutin Yuukung / EyeEm\Getty Images
Explore the settings in your security app. Make sure to browse through all of the settings in your security camera app so you’re making use of all available features.

You don’t want to realize audio recording is disabled after an intruder has already broken in. Often sound provides police with important clues. Also, make sure to adjust the camera resolution to the highest setting available for clear images of faces and license plates.

Use IP camera software. Since security cameras each have a unique IP address, you can use generic IP security camera apps that can connect to all cameras you’ve installed and display them on one screen. This lets you use your tablet, computer, or smartphone to see all cameras at once.

#Install #Security #Cameras

How to Install Security Cameras

Proper installation in easy-to-follow steps

You may want to install security cameras around your home to increase your sense of security. But there are a number of important factors you should keep in mind when choosing the right camera, and deciding on the location for your security camera installation.

Select the Security Cameras

Before you mount your security cameras, you’ll need to find the best security cameras to meet your needs. Always choose the right camera with the right features for the right job. Here are a few important considerations to keep in mind:

If the location you’re mounting a camera already has motion-activated lights, you can save money by buying a security camera without night vision.
If there are no power sources or outlets nearby, use a security camera that’s battery or solar-powered.
To ensure important video or photos don’t get lost, try to purchase cameras with cloud-based storage.
Always purchase the highest resolution camera you can afford.
If your internet is reliable, a wireless camera with cloud storage is easier to install. Otherwise, you’ll need to purchase more expensive wired cameras as well as a central controller for video recording.
Select the Right Mounting Hardware

The best outdoor security cameras are those that come with a hood to shield from sun glare. If you afford a dome camera, these are even better because it’s difficult for intruders to see where the camera is pointed. Security cameras come with a round base plate mechanism that allows for easy adjustment of the camera angle after mounting.

Night vision cameras come with what look like extra camera lenses. These are actually LED bulbs that illuminate an area with light in a frequency that’s invisible to the human eye. Intruders won’t see this light, but your camera will be able to see the entire area as well as if it were daytime.
Determine Where to Mount Your Security Cameras

Before you begin the process of actually mounting your security cameras, you should spend some time considering where the most effective places are to mount them. Here are some things to keep in mind:

Consider each entry point separately. The most important aspect of installing a security camera is location. Consider every entry point to your house as a separate installation project. Step back and examine the entire entry point. Imagine where intruders will most likely be coming from when they approach the entry point to the house.

Take advantage of existing objects above doorways. For doorways, place a camera over the door for clear face captures. If you already have lights above the door, these are an excellent location to conceal a security camera and make it appear only as part of the lighting base.

Use beams or posts. Beams and joists are usually positioned at a high angle that provide both an overhead view of the intruders face, as well as an angle of access routes intruders will take to approach the doorway.

Remember side access points like windows. Intruders don’t always use doorways. If there are windows on the sides of a home, consider installing a security camera on any nearby objects like posts or trees that provide a clear view of those entry points.

Rear entry points are most critical. Most intruders think it’s safer, especially at night, to enter a rear door. Especially if that door goes into the basement. Just like a front door, consider all posts, beams and other structures where you could mount the camera. Ideally aim for a camera angle like the one below which covers not only the doorway but also the access path that an intruder has to approach from.

How to Install Security Cameras

Once you’ve selected your cameras and decided where they will be most effective, you can begin the process of actually installing the security cameras. Installation is part physically installing the hardware and part configuring the software.

These installation instructions are general steps you’ll need to install your security camera. While most cameras will require these steps, some manufacturers may require additional steps or may require a different order for the steps to be completed. Be sure to read the installation instructions and materials that come packaged with your chosen security cameras.

Once you’re ready to start installing your cameras you’ll probably need to configure the cameras in the accompanying security app. Make sure to get the mobile app installed, the camera powered up, and your app communicating with the camera properly. Usually, apps need you to scan a QR code on the back of the camera which can be difficult if you’ve already mounted it.

Mount the base. At each entrance point, decide on the location or locations where you want to mount your camera. Start by mounting the base plate. These usually have two or three screw holes. Most cameras come with self-drilling screws that will work in most types of wood with just a regular electric drill.

Determine how the camera attaches to the base plate. Most cameras come with mounting hardware that attaches to the base plate in a way that’s easy to connect and disconnect by pressing a button. Make sure you understand how the unit attaches to the base plate before you finish attaching the base plate to the mounting point.

Mount and adjust the camera. Once the base plate is attached to the post or wall where you’re mounting the camera, attach the mount and the camera to the base plate. Then adjust the camera angle and tighten the screws or wingnuts that hold the camera position in place.

Mount and adjust any peripherals. If you’re using a solar-powered camera, then you’ll need to repeat the process above to mount the solar panel in a nearby location. Try to mount any solar panels in a location that has clear access to the path of the sun throughout the entire day.

Next, attach and run all cables. If you’re using a wireless solar-powered camera then you’ll only need to worry about the wire from your camera to the solar panel.

Battery-powered cameras won’t have any cables.

Wired cameras will require both the data line into the house (which may require drilling or passing the wire through existing conduit), as well as running wires to a nearby outlet. Outdoor security camera wires are rated for outdoor use, so it’s okay to tie-wrap the cable to any existing wires on the same pole. If there are none, you can use wire staples to attach the wire along wooden posts and along walls.

 Sutin Yuukung / EyeEm\Getty Images
Explore the settings in your security app. Make sure to browse through all of the settings in your security camera app so you’re making use of all available features.

You don’t want to realize audio recording is disabled after an intruder has already broken in. Often sound provides police with important clues. Also, make sure to adjust the camera resolution to the highest setting available for clear images of faces and license plates.

Use IP camera software. Since security cameras each have a unique IP address, you can use generic IP security camera apps that can connect to all cameras you’ve installed and display them on one screen. This lets you use your tablet, computer, or smartphone to see all cameras at once.

#Install #Security #Cameras


Synthetic: Vik News

Vik News

Viknews Vietnam specializes in sharing useful knowledge about marriage - family, beauty, motherhood experience, nutritional care during pregnancy, before and after birth, lipstick, royal jelly, home and furniture. (wooden doors, decorative chandeliers, dining tables, kitchen cabinets..)……

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Back to top button